Sales

2021 Νέος σχεδιασμός 10W 20W 30W 50W 70W 100W 100W MAX SUPER Q-Διακόπτης παλμική σήμανση ινών Laser σήμανση πηγή

Λεπτομέρεια προϊόντος

2020 New Design 10W 20W 30W 50W 70W 100W Max Super Q-SWITCH PULSED FIBER LASER Marking Engraving Source

περιγραφή προϊόντος

MAX laser source 30watt aser source

Fiber Laser Source MAX laser power source 20W 30W 50W 70W

Μοντέλο	MFP-5	MFP-10	MFP-20	MFP-30	MFP-50	MFP-70
Average ray power (W)	5	10	20	30	50	70
Working method	Σφυγμός	Σφυγμός	Σφυγμός	Σφυγμός	Σφυγμός	Σφυγμός
Beam Quality (M2)	1.5	1.5	1.5	1.5	1.5	1.8
Center Wavelength(nm)	1064	1064	1064	1064	1064	1064
Spectral broadband 3db (nm)	5~10	5~10	5~10	5~10	5~10	5~10
Single Pulse energy (mj)	0.45	0.45	1	1~1.2	1~1.5	1.4mj@50khz
Pulse Width FWHM (ns)	100(90~110)	100(90~110)	100(90~110)	100(90~110)	100(90~110)	100~140
Pulse repeat frequency(KHz)	10~30	22~50	20~80	30~60	33~80	50~170
Output power instability(%)	5	5	5	5	5	5
Output beam diameter(mm)	7.5(6~9)(1/e2)	7.5(6~9)(1/e2)	7.5(6~9)(1/e2)	7.5(6~9)(1/e2)	7.5(6~9)(1/e2)	7.5(6~9)(1/e2)
Output beam ellipticity(%)	90	90	90	90	90	90
Laser open time(us)	110~140	110~140	110~140	110~140	110~140	110~140
Laser close time(us)	110~150	110~150	110~150	110~150	110~150	110~150
Fiber optic cable length(m)	2.5(1.9~3)	2.5(1.9~3)	2.5(1.9~3)	2.5(1.9~3)	2.5(1.9~3)	2.5(1.9~3)
Working Voltage (VDC)	24(23~25)	24(23~25)	24(23~25)	24(23~25)	24(23~25)	24(23~25)
Reted Power consumption(W)	90	120	150	240	360	450
Working environment temperature(°C)	10~42	10~42	10~42	10~42	10~42	10~42
Relative humidity of working environment(%)	10~95	10~95	10~95	10~95	10~95	10~95
θερμοκρασία αποθήκευσης(°C)	-10~60	-10~60	-10~60	-10~60	-10~60	-10~60
Cooling method	αερόψυξη	αερόψυξη	αερόψυξη	αερόψυξη	αερόψυξη	αερόψυξη
Whole machine dimension (mm)	355266120	355266120	355266120	355266120	355266120	355266120
Weight (kg)	10	10	10	10	10	10

Χαρακτηριστικά Προϊόντος:

1. High reliability:

All optical fiber, no space optics, less failure

2. Precision marking:

Good beam quality, small pulse width,more precision marking effect.

3. Easy to intergrate:

The volume is reduced by 67%, the weight is reduced by 50%, and the equipment integration is easier.

4. Smart operation:

Built-in cooling fan can intelligently adjust the wind speed, which is convenient for energy saving.

5. Sealed structure:

Fully-structure sealed structure is used to prevent dust and moisture,ensuring long-term operation of the machine.

Packaging & Shipping

2020 New Design 10W 20W 30W 50W 70W 100W Max Super Q-SWITCH PULSED FIBER LASER Marking Engraving Source

Οι Υπηρεσίες μας

Daily maintenance and precautions
(1) When the laser is working, do not touch or collide with the movable beam of the scanning workbench;
(2) The laser and optical lens are fragile, please handle with care and avoid vibration when handling;
(3) When there is a malfunction in the machine, stop working immediately and ask a professional to deal with it;
(4) Pay attention to the sequence of turning on and off the laser;
(5) Note that the format of the marking machine shall not exceed the working format;
(6) Please keep the room and the surface of the machine clean and tidy.

MAX Laser strongly recommends that you read the following operating points before operating the laser:
(1) When the power is turned on, do not directly look at the laser light hole;
(2) Avoid placing the laser and related optical output devices on the same level as the eyes;
(3) Reasonably select safety protection equipment according to the laser output power and wavelength requirements to ensure operation
Personnel safety
(5) Do not install a sight when the laser is working;
(6) Please make sure to use the sight when the laser is turned off (such as when installing the sight on the fixture or observing the end face with optical instruments).
(7) Please use the defocus method to mark on the high reflective material, otherwise the laser will be directly damaged.
(8) For collimated output, please do not touch the output lens or clean it with any solvent. You can use lens tissue to clean the output lens. After use, please replace the protective cover of the sight.

Marking Sample

2020 New Design 10W 20W 30W 50W 70W 100W Max Super Q-SWITCH PULSED FIBER LASER Marking Engraving Source