Buy ETL CE led strip led driver model 12v 24v 36w
SMT-012-036VW is 12vdc 3amp 36w led driver , input voltage 100-265vac, ETL and CE listed, aluminum IP67 design for indoor lighting TDXL LED Modules 30w.
Specification
MODEL | SMT-012-036WW | SMT-024-036VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 3.0Amp | 1.5Amp | |
CURRENT RANGE | 0~3.0A | 0~1.5A | |
RATED POWER | 36W | 36W | |
RIPPLE&NOISE(max) | 150mV | 150mV | |
CURRENT TOLERANCE | ±0.5V | ±0.5V | |
SETUP RISE TIME | 80ms/110,220VAC | 81ms/110,220VAC | |
HOLD UP TIME(Typ.) | 60ms/110-220VAC | 60ms/110-220VAC | |
INPUT | VOLTAGE RANGE | 100~265VAC | |
FREQUENCY RANGE | 50~60Hz | ||
POWER FACTOR(Typ.) | |||
EFFICIENCY(Typ.) | >84% | >84% | |
AC CURRENT(Typ.) | 3.5A/110,220VAC | 2.0A/110,220VAC | |
INRUSH CURRENT (Typ.) | COLD START 50A/110~220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
SAFETY&EMC | SAFETY STANDARDS | ETL/ROHS/CE Mark(EMC,LVD),IP67 | |
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentoned are measured at 110V,220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1mΑγοράστε ETL CE led strip led driver μοντέλο 12v 24v 36w
Το SMT-012-036VW είναι 12vdc 3ampΠρόγραμμα οδήγησης led 36w, τάση εισόδου 100-265vac, ETL και CE, σχεδιασμός αλουμινίου IP67 για φωτισμό εσωτερικού χώρου
Μονάδες TDXL LED 30w.
ΠροσδιορισμόςΜΟΝΤΕΛΟSMT-012-036WW SMT-024-036VW ΠΑΡΑΓΩΓΗ DC ΤΑΣΗ 12V 24V