Features 1. High efficiency,save energy ,protected environment. 2. High stability and low ripple, increase light efficiency and decrease light attenuation. 3. Meet to safety standard and EMC 4. Assure LED stability long lift and light efficiency by constant voltage. 5. Integrity protection,over loading, over voltage ,over current. 6. Protections:Short circuit/Overload/Over temperature 7. Cooling by free air convection 8. 100% full load burn-in test. 9. Suitable for LED lighting |
SPECIFICAION | |||||
MODEL | SMT-012-150VW | SMT-024-150VW | |||
OUTPUT | DC VOLTAGE | 12V | 24V | ||
RATED CURRENT | 12.5A | 6.25A | |||
CURRENT RANGE | 0~12.5A | 0~6.25A | |||
RATED POWER | 150W | 150W | |||
RIPPLE&NOISE(max) | 150mV | 150mV | |||
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |||
SETUP RISE TIME | 80ms/110VAC, 220VAC | ||||
HOLD UP TIME(Typ.) | 60ms/110VAC, 220VAC | ||||
INPUT | VOLTAGE RANGE | 100-265VAC | |||
FREQUENCY RANGE | 50~60Hz | ||||
POWER FACTOR(Typ.) | 0.95 | ||||
EFFICIENCY(Typ.) | ﹥87% | ﹥87% | ﹥87% | ﹥87% | |
AC CURRENT(Typ.) | 1.85A/110VAC, 220VAC | ||||
INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |||
Overload | overload protected@145-160% above peak rating | ||||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||||
ENVIRONMENT | WORKING TEMP. | -30~+55℃ (Refer to output load derating curve) | |||
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||||
SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(EMC,LVD),IP67 | |||
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||||
[1mΌνομα προϊόντος: AC σε DC |
Τροφοδοτικό LED 150W σταθερής τάσης
1. Υψηλή απόδοση, εξοικονόμηση ενέργειας, προστατευμένο περιβάλλον.2. Υψηλή σταθερότητα και χαμηλός κυματισμός, αυξάνουν την απόδοση φωτός και μειώνουν την εξασθένηση του φωτός.
DC ΤΑΣΗ12V24V
ΟΡΙΣΜΕΝΟ ΡΕΥΜΑ
150 mV
150 mV