SPECIFICAION
MODEL | SMT-012-006VW | SMT-024-006VW | |||
OUTPUT | DC VOLTAGE | 12V | 24V | ||
RATED CURRENT | 1A | 0.5A | |||
CURRENT RANGE | 0~0.5A | 0~0.25A | |||
RATED POWER | 6W | 6W | |||
RIPPLE&NOISE(max) | <700mV | <400mV | |||
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |||
INPUT | VOLTAGE RANGE | 100~265VAC | |||
FREQUENCY RANGE | 47~63Hz | ||||
POWER FACTOR(Typ.) | |||||
EFFICIENCY(Typ.) | >80% | >81% | |||
AC CURRENT(Typ.) | 0.090A/100~220VAC | ||||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |||
Overload | overload protected@145-160% above peak rating | ||||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |||
INGRESS PROTECTION | IP67 design for indoor or outdoor installations | ||||
STORAGE TEMP | -40~+80℃ | ||||
SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP67 UL, CE, ROHS approved | |||
WITHSTAND VOLTAGE | I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||||
NOTE | 1.All parameters NOT specially mentioned are measured at 110V ~ 220VAC input,rated load and 25℃ of ambient temperature. | ||||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||||
[1m220v αδιάβροχο 24V 6W |
Πρόγραμμα οδήγησης LED σταθερής τάσης
0~0,5Α
εύρος τάσεως