19W LED Driver & Microwave Sensor Constant Current 0.3A/0.35A Ceiling Light 14M(D)x6M(H)
HT19V 2 is a LED Driver&Microwave Sensor 2-in-1 Products with 30-54V Output Voltage Detection Range & Height of 6m(H) x 14m(D), Dimming Function Microwave Motion Detector with 12-19W Output Power Suitable for Ceiling Light
Features:
1. 3 years warranty, IP20
2. Abnormal protection SCP: Auto recovery, OVP, OCP, OTP
3. Tri-level control by 1-10V output
4. Dusk & Dawn Microwave Motion Sensor
5. Dimming Function with 10%/20%/30%/50% Stand-by Brightness
6. Constant Current with options of 0.3A/0.35A
7. Detection Range x Height of 14M x 6M
8. Output Power 19W max. with Voltage of 30 -54V
9. Efficiency of 87%
10. Empty Load voltage of 63V max.
11. EMC standardEN55015
Product Description
Input voltage | 220~240VAC 50/60Hz |
Input current | 0.1 Max |
Input power | 22W Max |
Detection area | 50%/100% |
Hold time | 5s/60s/ 5min/10min |
Daylight threshold | 2Lux /10Lux /50Lux/Disable |
Stand-by period | 0s/10s/10min /+∞ |
Stand-by dimming level | 10%/30% |
Microwave frequency | 5.8GHz±75MHz |
Microwave power | <0.3mW |
Detection angle | 30°-150° |
Mounting height | Max.6m |
Detection range | Max.ø14m |
Output LED current | 0.3A/0.35A±5% |
Output LED voltage | 30-54V |
Output LED power | 12-19W Max. |
Empty load voltage | ≤63V |
Power factor | >0.9 |
Efficiency | 87% (Max.) |
Operating temperature | Ta: -20°C+50°C Tc: 80°C |
Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP |
EMC standard | EN55015 |
Safety standard | EN61347-1 EN61347-2-13 EN60598-1 |
IP rating | IP20 |
Life time | 30,000 hours |
Warranty | 3 years |
Detection Range
This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-6m.
Mechanical structure
With eight DIP switch poles to set all parameters
With two DIP switch poles to choose different output current
With two installation hole, easily fixed to the lighting fixture for end user.
Wiring diagram
Two poles to connect with power supply (220-240VAC)
Two poles to connect with LED Light
Dimensions (mm)
DIP Switch Setting
Detection area Hold-time Daylight threshold Stand-by period Stand-by dimming level
In this area, The period of Definition of the The period of light The definition of movement will light keeping ambient brightness; keeping low output low output in the be detected 100% brightness only when the before it's standby period.
and able to after moving ambient brightness completely trigger the objects leave the is lower than the switched off. When sensor. 100% detection area. preset specific lux it's preset as∞“,detection
[1mΟδηγός LED 19W & Αισθητήρας μικροκυμάτων Σταθερό ρεύμα 0,3A/0,35A Φωτιστικό οροφής 14M(D)x6M(H)
Το HT19V 2 είναι ένας οδηγός LED και αισθητήρας μικροκυμάτων 2-σε-1 Προϊόντα με Εύρος ανίχνευσης τάσης εξόδου 30-54V & ύψος 6m(H) x 14m(D), Λειτουργία Dimming Ανιχνευτής κίνησης μικροκυμάτων με ισχύ εξόδου 12-19W, κατάλληλος για φωτιστικό οροφής
Χαρακτηριστικά:
D3 χρόνια εγγύηση, IP20
Μη φυσιολογική προστασία SCP: Αυτόματη ανάκτηση, OVP, OCP, OTP
Έλεγχος τριών επιπέδων με έξοδο 1-10V
4. Αισθητήρας κίνησης μικροκυμάτων Dusk & Dawn
5. Λειτουργία Dimming με 10%/20%/30%/50% φωτεινότητα αναμονής
6. Σταθερό ρεύμα με επιλογές 0,3A/0,35A
7. Εύρος ανίχνευσης x Ύψος 14Μ x 6Μ
8. Ισχύς εξόδου 19W max. με τάση 30
-54V
9. Αποδοτικότητα 87%
10. Τάση κενού φορτίου 63V max.
11. Πρότυπο EMCEN55015
περιγραφή προϊόντος
Τάση εισόδου
220~240VAC 50/60Hz
Ρεύμα εισόδου
0,1 Μέγ
Δύναμη εισαγωγής
22W Μέγ
Περιοχή ανίχνευσης
50%/100%
Κρατήστε χρόνο
5s/60s/ 5min/10min
Κατώφλι φωτός της ημέρας
2Lux /10Lux /50Lux/Απενεργοποίηση
Περίοδος αναμονής
0s/10s/10min /+∞
Επίπεδο μείωσης φωτεινότητας σε κατάσταση αναμονής
10%/30%
Συχνότητα μικροκυμάτων
5,8GHz±75MHz
Ισχύς μικροκυμάτων
<0,3 mW