12v 24v 120w led transformer driver power
Waterproof IP67 12v 24v 120w led driver are ETL CE and ROHS approval, high PFC 0.95 for high solutions LEDs, like LUMINAIRE led lamps 12v.
Specification
MODEL | SMT-012-120VW | SMT-024-120VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 10.0A | 5.0A | |
CURRENT RANGE | 0~10.0A | 0~5.0A | |
RATED POWER | 120W | 120W | |
RIPPLE&NOISE(max) | 150mV | 150mV | |
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |
SETUP RISE TIME | 80ms/110V,220VAC | ||
HOLD UP TIME(Typ.) | 60ms/110V,220VAC | ||
INPUT | VOLTAGE RANGE | 100~265VAC | |
FREQUENCY RANGE | 50~60Hz | ||
POWER FACTOR(Typ.) | |||
EFFICIENCY(Typ.) | ﹥83% | ||
AC CURRENT(Typ.) | 0.92A/110VAC, 0.86A/220VAC | ||
INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(LVD),IP67 | |
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1mΙσχύς προγράμματος οδήγησης μετασχηματιστή led 12v 24v 120w
Αδιάβροχο IP67 12vΠρόγραμμα οδήγησης led 24v 120wείναι έγκριση ETL CE και ROHS, υψηλό PFC 0,95 για LED υψηλών λύσεων, όπως λαμπτήρες led LUMINAIRE 12v.
Προσδιορισμός
ΜΟΝΤΕΛΟSMT-012-120VWSMT-024-120VW ΠΑΡΑΓΩΓΗ DC ΤΑΣΗ 12V 24V ΟΡΙΣΜΕΝΟ ΡΕΥΜΑ